806 Autoworks

Your Automotive Accessory Specialist

 7527 Canyon Dr. Amarillo, TX 79110  806-418-6850
  • Home
  • Services
    • Car Audio
    • Mobile Video
    • Remote Starters
    • Truck Accessories
  • About Us
  • Location
  • Contact Us
  • Facebook
  • Instagram
  • Yelp
You are here: Home / RESOURCE LIBRARY / What Is the Big Three Electrical Upgrade?

What Is the Big Three Electrical Upgrade?

Big Three

We were recently at an event that was hosting a mobile audio system SPL competition. If you aren’t familiar with this sort of thing, it’s a contest to see who has the loudest stereo. We aren’t talking about cranking the dial on the factory radio. Instead, some of these folks build steel and concrete reinforced subwoofer enclosures and feed tens of thousands of watts to their subwoofers.

As you can imagine, delivering that much power requires significant electrical system upgrades. Many of these creations have multiple alternators and huge banks of batteries. If you’ve upgraded your car or truck with an amplifier that can produce hundreds of watts to your speakers, there’s a wiring upgrade called the Big Three that can improve the efficiency of your electrical system. Let’s look at what this upgrade is and why it’s a great starting point for a high-power car audio system.

How Automotive Charging Systems Work

The first thing you need to know about delivering power to your amplifier is that most of the energy will come from your alternator, not the battery. The battery is there to start the car. Once a vehicle is started, the alternator, which is mechanically driven by the engine, provides power to replenish the battery for the next start. The alternator also runs the computers, ignition system, fans and lights in your vehicle. Once you’ve started the vehicle, you could remove the battery and everything would, under normal conditions, operate just fine.

This scenario changes if you add a high-power amplifier to your vehicle. Say you have a 1,000-watt amplifier and you want to deliver that full amount of power to a few high-power subwoofers. At 13.8 volts, most amplifiers of this type will consume about 100 amps of current. If you have the engine running, headlights on and a climate control system in operation, your car or truck may be using 30 or 40 amps of current to power those systems. If the alternator is only rated to produce 80 amps, there certainly won’t be 100 amps left for your stereo.

The additional current the amplifier wants will come from the battery, albeit at a lower voltage. You will likely find that an amplifier rated for 1,000 watts at 14.4 volts can only produce about 800 watts at 12 volts without clipping the output signal and adding significant distortion.

Big Three
When upgrading, make sure the retailer working on your car or truck uses all-copper, full AWG-spec power and ground cables like those from Rockford Fosgate.

How To Make the Most of Your Alternator

The first step in optimizing the electrical system in a car or truck is to reduce waste. In this case, waste is the power converted to heat because of resistance in cables and connections. First, have a look at your alternator and battery. How large are the wires running to and from them? Unless you have a big truck with a high-output alternator, chances are that the wiring is 4 or maybe even as small as 6-AWG.

Big Three
Aftermarket alternators like those from Ohio Generator can produce over 350 amps of current. They are going to need significant wiring to supply large amplifiers.
Big Three
Is a single run of 0-AWG power cable enough for almost 400 amps of current from a Singer alternator? Likely not.

Please make no mistake about it, the company that built your car or truck deliberately chose the smallest, lightest and least expensive wire that would allow the vehicle to function reliably. They had no intention of providing conductors that could handle two to three times what the alternator was rated for.

The Wiring Upgrades that Make the Difference

The Big Three upgrade involves adding to or replacing the existing conductors with larger, high-quality wires. The upgrades in the Big Three are:

  • The run from the alternator chassis to the negative terminal of the battery.
  • The run from the output of the alternator to the positive terminal of the battery.
  • The ground connection from the negative terminal of the battery to the chassis of the vehicle.
Big Three
A representation of the wires that need upgrading to complete the Big Three.
Big Three
It’s not unreasonable to run multiple cables to the alternator to optimize power delivery to numerous electrical systems.

Depending on your vehicle, there may be other wires that can be upgraded at the same time. For example, if there is a main power distribution box under the hood, running new wire to it can help provide more voltage to the factory-installed electrical and electronic components in your vehicle.

Big Three
Two runs of 4-AWG power wires feed the factory fuse block in this Jeep Grand Cherokee.

Another upgrade you may want to make at the same time is replacing the battery terminals. Some factory-installed terminals are notoriously flimsy. If you’re demanding significant current from the battery, then optimizing each component along the way only makes sense.

Big Three
Stamped steel battery terminals don’t provide much room for upgrade.
Big Three
High-quality plated brass terminals like these from Audison Connection allow your installer to maximize current transfer from the battery.

Is the Big Three Enough?

In 2012, we wrote an article about upgrading the stock electrical system wiring in modern cars and trucks. Even though it was a decade ago, new vehicles at the time were being constructed out of materials like QuietSteel and aluminum, and some companies had started using adhesives instead of spot welds to bond unibody panels together. All of these advances in vehicle assembly work against our desire to deliver large amounts of current to an amplifier, especially when we want to use the body as the ground return path.

Power delivery from the positive terminal of the alternator is as important as the ground connection to the chassis and battery. If the current can’t flow through both, you are wasting energy by transforming it into heat. Upgrading and adding grounds with the Big Three is a start. If you are serious about optimizing your electrical system, then you’ll want to add a ground wire from the battery or alternator directly to your amplifier. Back in 2012, we called this the Big Four.

Big Three
Having a ground wire run from the battery or alternator to the ground location of your amplifier can dramatically improve current flow.

Full disclosure: This wasn’t our idea. The first we heard of running a dedicated ground wire was when we were checking out Precision Power’s fleet of Chevrolet Suburban demo vehicles back in the ’90s. The topic came up again when Ford introduced QuietSteel in the F-150 vehicles, and companies were having problems with amplifiers failing because of low voltages. As a solution, JL Audio suggested adding what they called a parallel ground. This wire would connect to a conventional ground point in the rear of the vehicle and run to the battery’s negative terminal or the alternator. A benefit of the parallel ground is that it offers less resistance than a dedicated ground wire or using the chassis. As a result, current can flow through both paths, reducing the voltage drop and improving system performance.

Optimize Your Vehicle Electrical System

If you’ve purchased a high-power amplifier for your vehicle, talk to your local specialty mobile enhancement retailer about upgrading all the wiring in the electrical system. Implementing an upgrade like the Big Three or, better yet, the Big Four will allow the amplifier to produce more power and allow the system to play louder with improved reliability and efficiency.

This article is written and produced by the team at www.BestCarAudio.com. Reproduction or use of any kind is prohibited without the express written permission of 1sixty8 media.

Share this:

  • Click to email a link to a friend (Opens in new window)
  • Click to share on Facebook (Opens in new window)
  • Click to share on Twitter (Opens in new window)
  • Click to share on Pinterest (Opens in new window)

Related

Filed Under: ARTICLES, Car Audio, RESOURCE LIBRARY

About BestCarAudio.com

BestCarAudio.com is a showcase for the very best mobile electronics retailers in the world and a place to educate and inform interested consumers about existing and emerging technologies.

Recent Articles

Lets Talk About Car Audio Midrange Speaker Aiming and Directivity

Let’s Talk About Car Audio Midrange Speaker Aiming and Directivity

March 19, 2023 

Not too long ago, we looked at the physics surrounding car audio tweeter directivity and why tweeters must be pointed toward the listening position. If you haven’t read that … [Read More...]

Do Shallow Subwoofers Work Better in Small Enclosures

Do Shallow Subwoofers Work Better in Small Enclosures?

March 12, 2023 

There seems to be some misunderstanding about the relationship between subwoofer mounting depth requirements and performance relative to enclosure volume. We constantly see … [Read More...]

A First Look at Car Audio Speaker Distortion

A First Look at Car Audio Speaker Distortion

March 6, 2023 

If you’ve been a reader of BestCarAudio.com, you know we’ve published a lot of articles about distortion. We include detailed measurements of harmonic and intermodulation … [Read More...]

Preparing Yourself and Your Vehicle for a Car Audio Installation

Preparing Yourself and Your Vehicle for a Car Audio Installation

February 26, 2023 

If you’ve scheduled an appointment with a local specialty mobile enhancement retailer to have your car or truck upgraded, there are a few things you’ll want to know to make the … [Read More...]

Car Audio Subwoofer Amplifier Strapping

Car Audio Subwoofer Amplifier Strapping

February 19, 2023 

Let’s say that you are building a car audio system intended to produce as much bass as possible. In that case, you are going to need subwoofers capable of handling vast amounts of … [Read More...]

Very Professional

Bryan has worked on a few vehicles for me, and his work has always been very professional. Everything he has done for me looks like it came straight from the factory that way, and the service he has provided has been fantastic. I would recommend anyone needing any type of audio work to give him a call you won't be disappointed!

A love of sound only few can know…

Bryan has been a friend of mine for most of my life. He and I have ventured several stereo systems our entire lives. We both share a love of sound only few can know. We have worked together, installed together, learned lessons, experienced life as a whole. In my life travels, I have still never met a better man, installer, and person. I am proud to know Bryan as a friend and business owner.

Thank you for all the hard work yall are doing

I've been accessories manager at a Toyota Dealership going on 3 yrs now, and the majority of my remote starts have been done by Bryan over the years. Whenever I have questions Bryan always makes himself available to help, whenever there is an issue, he would never give me the run-around he would simply tell me to bring it by and he would fix it whether minor or major. He is extremely thorough with his installations which is the most important factor when installing aftermarket electronics in Toyota vehicles as Toyotas are very sensitive in their electrical configurations. He has won several awards for his work and his actions back up everyone.

Subscribe to Our Website

Enter your email address to subscribe to our website and receive notifications of new posts by email.

Location


Get Directions to 806 Autoworks

Address

806 Autoworks
7527 Canyon Dr.
Amarillo, TX 79110
Phone: 806-418-6850
Email: bryan.t@806autoworks.com

Connect with Us

  • Facebook
  • Instagram
  • Google+
  • Yelp

Services

  • Car Audio
  • Mobile Video
  • Remote Starters
  • Truck Accessories
Monday9:00 AM - 5:00 PM
Tuesday9:00 AM - 5:00 PM
Wednesday9:00 AM - 5:00 PM
Thursday9:00 AM - 5:00 PM
Friday9:00 AM - 5:00 PM

Saturday: By Appointment Only

Copyright © 2023 806 Autoworks · Privacy Policy · Website by 1sixty8 media, inc. · Log in

 

Loading Comments...